Scrap aluminum crusher equipment manufacturer's description of the crushing structure of the equipment

The crushing structure of the scrap aluminum crusher mainly consists of a hammer head structure, a frame body, a box structure, a transmission part, a power part, and a discharging part. The scrap aluminum crusher is mainly used for various aluminum alloys, scrap door and window materials, and broken materials. For the crushing and recycling of bridge aluminum materials, the equipment has high crushing efficiency, clean sorting, and high profit, which is worth investing in. The following is a brief introduction to some components of the scrap aluminum crusher.

scrap aluminum crusher
1. Hammer head structure

The hammer head structure of the scrap aluminum crusher is a hammer-throwing structure. When the scrap metal enters the crushing cavity from the feed inlet, it is strongly impacted by the high-speed rotating hammer head, forming the hammer head and the material, and the material and the counterattack. The strong collision between the liner, the material and the material causes the primary crushing. The primary crushed materials fall to the screen body at the bottom of the scrap aluminum crusher. Materials smaller than the screen hole size fall through the aperture. If the material volume is too large, it will be brought up by the rotating hammer head for secondary crushing. The hammer head is the waste The most important component of the aluminum crusher, the stronger the impact ability of the hammer head, the better the effect of crushing materials.

2. Counterattack lining

The impact lining plate of the scrap aluminum crusher is also called the impact plate, which is in the shape of broken lines, arcs, grids, etc. The design of the counterattack liner is simple and highly efficient. The material after the counterattack collides with the counterattack liner. At the same time, a large number of collisions are formed between scrap aluminum particles. The impact force endured makes the scrap aluminum material become finely divided. The material is crushed under multiple effects. , the material is completely finely crushed.

3. Sieve plate

Disperse the material and feed it evenly along the length of the rotor. Some are made into a sieve plate shape to remove fine materials. Maintain an appropriate unloading point. Generally, the inclination angle of the feeding plate is about 30 degrees. The material is impacted for the first time at 30 degrees. It flies to the middle of the impact plate along the tangent direction of the rotor, and the crushing effect is good.

4. Crusher box

The scrap aluminum crusher box is made of high-quality cast iron or steel plates welded together. It has an upper and lower split structure. The upper part is the crusher body structure, and is assembled with the lower part into a semi-enclosed box using a hydraulic power-assisted lid opening system. The material crushing structure such as the hammer head structure is installed in the box; the bottom of the equipment is a fixed base to ensure the stability of the equipment operation.

During production, attention should be paid to the material feeding process. Materials are fed quantitatively from the hopper to ensure uniform feeding to prevent equipment jamming caused by material blockage. The scrap aluminum crusher and various ancillary equipment such as conveyor belts, eddy current separators, vibrating screens, etc. together form a scrap aluminum crusher production line. The unified production of the same production line not only ensures stable production efficiency, but also standardizes the production process to facilitate manufacturers. Materials and production processes are controlled.