New steel bar shredder-Steel bar cutting machine equipment

Over the years, small and medium-sized cities have been continuously renovated, and many urban villages have been demolished and renovated. During the entire demolition and reconstruction process, a large amount of waste steel bars have been produced, and these waste steel bars also have great utilization value. Based on the current situation, Jiulong Company has developed a new steel bar shredder, which can also be called a steel bar cutting machine.

Henan Jiulong series steel bar shredders are designed to cut and produce large quantities of discarded demolition steel bars, construction steel bars, and loose steel bars. The thickness and number of teeth of the steel bar shredder can be changed according to different materials. The steel bar shredder shreds them in one go. The machine diameter is below 8cm, and the shredding rate reaches 99%. The equipment operates at low speed, and the noise and dust can reach considerable standards.

working principle:

The blade of the steel bar shredder is made of alloy steel with a certain strength, which has the characteristics of wear resistance and certain strength. The shafts run at differential speeds and have functions such as tearing, squeezing, and biting. They are designed for shredding metal and have the function of discharging materials. Uniform, considerable output, low noise and other characteristics. The electrical part is controlled by PLC and has functions such as automatic detection and overload protection.

Features:

1. This series of steel bar shredders has the characteristics of low speed, torque, and low noise. It adopts a PLC control system and can be automatically controlled. It is equipped with start, stop, reverse, and automatic reverse control functions.

2. The motor + reducer drives the cutter shaft to achieve the shearing effect of low speed torque.

3. The bearing is six-layer sealed, effectively waterproof and dustproof, and extends the service life of the bearing.

4. After the tool is worn, the tool coating and welding repair technology is used to realize the repeated use of the tool and greatly reduce the maintenance cost of the tool.

5. The split box design allows the entire cutter shaft (shaft, blade, bearing, sealing system) to be removed quickly and easily.

6. The cutting tools are arranged in a spiral to achieve cutting.

7. Both the inner hole of the tool and the spindle surface adopt a hexagonal design to achieve uniform force stress on the tool.

8. Different types of knives can be used according to the different materials and product shapes to be shredded.