Car Shredder

The large-scale scrapped car shredder can crush scrapped cars, car cabs, car bumpers, car compartments, car side panels, car keel strips, waste colored steel tiles, etc., for recycling in iron-making and steel-making plants. use. The scrap car shredder is suitable for crushing bicycle frames, motorcycle frames, color steel tiles, carriage panels, keel bars, color TVs, refrigerators, washing machines, tinplate, scrap angle steel, scrap square tubes, car cabs, filing cabinets, safes, and car slots. Bangs, baled briquettes, electrical shells and other scrap steel and industrial waste equipment with high impurities. It is a new medium-sized crushing production line. It is suitable for small and medium-sized users with an annual crushing capacity of less than 5,000 tons, small and medium-sized steel mills, and small and medium-sized scrap steel recycling companies. It can be used to provide clean and qualified furnace materials for steel companies. ​

Automobile shredder construction system:
The scrapped car shredder is easy to operate, and the knife change is simple and fast; the knife holder is optimized and the claw-shaped knife can disperse the force, so that the shearing force of each knife is increased. It is suitable for crushing thick materials, hard blocks, scraps, etc. It effectively improves the cutting force of the tool and reduces tool wear; it is equipped with an electronically controlled safety design, and the hopper adopts a double-layer structure and is filled with sound insulation materials, making the equipment highly safe and environmentally friendly, energy-saving and durable.

Working principle of automobile shredder:
The automobile shredder uses a fixed knife and a movable knife combined with each other. The fixed knife is S-shaped and fixed on the top of the cutterhead. When the material enters the casing, it plays the role of forced feeding and forced crushing. The movable knife is a vertical head. When the material is torn by the fixed knife, it will form particles smaller than the screen mesh during the beating process with the rotation of the turntable, and then filter into the discharge port through the screen mesh. When the material is discharged, it passes through the dust collector to completely suck away the paint leather and impurities. The broken metal particles are clean and bright, reducing pollution. Screen mesh can be designed and customized according to materials and user needs.

Features of car shredder:
The entire casing of the automobile shredder is welded with 25mm-30mm manganese steel plates and is equipped with lining plates, which is strong and durable. The spindle is made of forged parts that are finely honed and then heat treated so that it will not break no matter how high the torque is. The cutter head is made of manganese steel and is equipped with an S-shaped blade. A train wheel hub is strung between the cutter heads and a hammer head is forged. The main machine casing adopts a hydraulic cover lifting device, which makes maintenance convenient and fast. The design of the whole machine is generous and reasonable. And make reasonable improvements according to user requirements.

Car shredder features
1. Materials are mainly crushed under tensile and shear stress, while non-traditional crushers are mainly subject to compressive stress. The material is destroyed from the weakest link, so energy consumption can be greatly reduced, and research reports can be reduced to up to 1/10 of the same;
2. The pulling effect of the crushing tooth rollers rotating in opposite directions greatly increases the crushing ratio, which can reach a maximum of about 400, while the traditional equipment is about 3-56
3. The two rollers have a mutual cleaning effect, so they can be forced to discharge. Any materials that are sticky, wet, or easily wrapped around the moving parts of the ordinary crusher, such as iron wire, steel bars, cloth strips, etc., can be automatically discharged.